Blue / Shade 5
Blue / Shade 5
A cooling shade with an elegant depth, it is perfect for achieving a hotel experience at home. Elegant and sophisticated when paired with warm beige and pastel pink.
Blue / Shade 5
Gentle, compassionate, and welcoming
Peel & Stick Colour Samples
Our peel & stick colour samples are designed to be repositioned without damaging your walls; simply remove the backing and test them around the room. Each sample is true to life and painted using the exact same paint you will find in every can. Just remember that V&CO’s Dead-Flat Matt finish will absorb light, so it’s worth testing the colour around the room and at different times of day. Enjoy experimenting and make sure to tag us in your decorating journey.
Product Details
Premium Dead-Flat Matt finish for walls, ceilings and panelling with outstanding durability
Available in 2.5L, 5L and tester pots
Application: Brush, Roller, Sprayer
Coverage: 12m² per L
Type: Water-based
Recoat: 2-4 hours
For indoor use only. Do not apply in damp or humid conditions.
Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
The surface must be clean, dry and free of dust and grease.
Remove as much paint as possible from brushes and rollers before washing with warm, soapy water. Wipe up spills immediately with a damp cloth. Allow at least 1 week for finish to harden before washing with a mild detergent.
Read carefully and follow all instructions. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Contains a biocidal product: Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. VOC content: EU limit for this product (Category A/a): 30 g/l (2010). This product contains a maximum VOC content of <1 g/l.
Water-based paint. When applying, it is advisable to wear eye protection. Avoid inhalation of dust. Wear a face mask if dry sanding.
Dispose of unused paint responsibly. Check with your local authority to see if they provide facilities for the disposal of paint. Don’t empty leftover paint into drains or watercourses. Pour it into a box with shredded paper or cat litter, allow it to solidify away from children or pets, then dispose with household rubbish. Protect from frost.
